Inverting Op-Amp Analysis with Time Constants
Following up with the previous article, we analyze the standard inverting amplifier with a compensation capacitor in parallel with the feedback resistor […]
Simulating Open Loop Gain
Open loop gain is a crucial parameter of an op-amp amplifier. While designing the feedback network around it assuming infinite loop gain […]
Non-Inverting Op-Amp Analysis with Time Constants
The seminal paper by Hajimiri on analyzing circuits using time constant techniques, such the zero-value and infinite-value time constants based on the […]
Noise Analysis of Op-Amp Configurations – Using V and I source-shifting techniques
In this article we will apply the voltage- and current-source shifting theorems explained in this other article. We will work on several […]
The Nullor and Some Applications – Part I
While the 3-terminal op-amp symbol is the most widely used active element used in textbooks to analyze circuits using feedback, it is […]
Computing input-referred noise – The Easy Way
Biasing the (+) Op-Amp input with resistor to ground. Is its noise important? This article was inspired by two questions I read […]